23.11.2018Page 1 / 2 Alfons Markert + Co. GmbH Ein Unternehmen der Markert Gruppe Gadelander Straße 135 · 24539 Neumünster (Germany) Phone: +49 4321 8701-0 · Fax: +49 4321 8701-149 Email: marsoflex@markert.de · www.markert.de Any changes according to the respective state of the art without notice shall remain reserved. This document may and shall only provide non- binding advice. Due to the versatility of the installation and operating conditions as well as application and process technology, this technical datasheet can only be considered to be an non-binding guideline and does not release the buyer from their obligation to inspect the product delivered by us for its suitability for the intended processes and purposes. Therefore, a warranty claim cannot be derived on the basis of this datasheet. As a matter of course, we guarantee the perfect quality of our products according to our general conditions of sale and delivery. Technical data sheet f - universal chemical hose type 50HW PTFE The f universal chemical hose type 50HW PTFE is a universally usable elastomer hose with a seamless, conductive inner layer made of black PTFE. Suitable for use in chemical, pharmaceutical and food industries. Technical specification TubePTFE, black, smooth ReinforcementSynthetic textile reinforcements, galvanised steel wire spirals CoverEPDM, black, smooth, fabric pattern, resistant to abrasion, ageing and ozone Electrical properties Tube: R<10 6 Ω Cover: R<10 9 Ω (Ω/T per DIN EN 12115:2011) Through hose wall: R<10 9 Ω Temperature rage From -40°C to +150°C depending on medium and concentration. CleaningWith steam at +150°C Resistance Suitable for almost all media such as acids, lyes, oils, greases, alcohols and organic compounds. For more informations please use the f chemical resistance guide. Properties •PTFE anti-adhesion properties •FDA compliance •Can be used in EX zones 0 and 1 •Complies with DIN EN 12115:201123.11.2018Page 2 / 2 Any changes according to the respective state of the art without notice shall remain reserved. This document may and shall only provide non- binding advice. Due to the versatility of the installation and operating conditions as well as application and process technology, this technical datasheet can only be considered to be an non-binding guideline and does not release the buyer from their obligation to inspect the product delivered by us for its suitability for the intended processes and purposes. Therefore, a warranty claim cannot be derived on the basis of this datasheet. As a matter of course, we guarantee the perfect quality of our products according to our general conditions of sale and delivery. Alfons Markert + Co. GmbH Ein Unternehmen der Markert Gruppe Gadelander Straße 135 · 24539 Neumünster (Germany) Phone: +49 4321 8701-0 · Fax: +49 4321 8701-149 Email: marsoflex@markert.de · www.markert.de Technical data sheet f - universal chemical hose type 50HW PTFE Dimensions ID [mm] AD [mm] Bending radius [mm] Max. working pressure [bar] @ 20°C Max. vacuum [bar] @ 20°C Min. bursting pressure [bar] @ 20°C Art.-No. 13259016-0,96450HW013 193113016-0,96450HW019 253717016-0,96450HW025 324421516-0,96450HW032 385125516-0,96450HW038 506633016-0,96450HW050 637943016-0,96450HW065 759151016-0,96450HW075Next >